XONTEL Plus PBX, Руководство пользователя

Страница: 12 / 118

2
Quick Installation
2.1 Installation Attentions
To avoid unexpected accident or device damage, please read the following instructions before you install the XonTel
Plus PBX.

The adapter of the PBX accepts DC input voltage of 12V 2A. Please ensure stable and safe power supply;
 To reduce the interference to telephone calls, please separate power cables from telephone lines;

To guarantee stable running of the PBX, please make sure that there is enough network bandwidth;
 For better heat dissipation, please place the PBX on a flat surface and do not pile up with other devices;
2.2 Installation Steps

Connect the power adapter to the power jack;

Connect PSTN lines to the FXO ports;
 Connect network cable to the LAN port(s) and WAN port (please refer to 2.3 Network Connection);
2.3 Network Connection
XonTel Plus works in two network modes: route mode and bridge mode. When it is under the route mode, the IP
address of WAN port must be different from the IP address of LAN port. But when it is under the bridge mode, the IP
address of . WAN port and that of LAN port are the same.
Plus
PBX