Xonix NX-Vario, Руководство пользователя

Страница: 6 / 16

6
Description of the main screen symbols
The CLIMB/DESCENT indicator (up and down arrows) is located in the left corner of the
main screen. This indicator reflects the current state of the aircraft. If the vertical velocity is
zero, then two contour arrows are displayed one above the other . In the case of positive
vertical velocity, the top arrow is filled with color , if the vertical velocity is negative, then
the bottom arrow is painted over .
Just to the right of the upper arrow is a numerical indicator of the variometer value.
The next is the symbol of the vario signal . This symbol is displayed only when the vario
beeper works. Even if you turn off the sound and light indication, this symbol will continue to
be displayed on the screen when climb/descent. The difference from the arrow indicator,
mentioned above, is that the indicator has the ability to adjust the threshold, as well as
light and sound indication. For details, refer to "MENU 2" and "MENU 3".
Next to the right in the top line is displayed the vario sound ON/OFF indicator
("Button 3" long press to change the state).
The last in the top line is the indicator of flight time, measured in minutes . The time
starts counting when the device is turned on. Resetting the timer is done by long pressing
"Button 1".
In the second line to the right of the lower arrow of the variometer stands the symbol of
the chosen altitude ( , , ). Switching of altitudes is made by short pressing of
"Button 2". Zeroing of the selected altitude is made by long pressing of "Button 2". The
absolute altitude can also be set by direct entering the value of the pressure at the sea level
(refer to "MENU 1").
Next to the right is the value of the selected altitude in meters.
The last in the bottom line is an indicator of the air temperature in degrees Celsius .