21
XOMAX
XM-VRSU411
DE
Topic:
Radio mode
AMS Automatic frequency scan
Press the
AMS
button to start the
automatic frequency scan.
The unit searches automatically for the
radio stations with the strongest signal
and stores them in the memory cells
1-6 per frequency band.
Switch the frequency bands
Press the
BND
button on the front
panel or on the remote control to switch
the frequency bands between FM1, FM2
und FM3, AM1 and AM2.
RDS functions
Please note: the provided RDS functions
(AF, TA and PTY) in some countries may
be unavailable.
PTY function
(
Programme Type)
The Programme Type function allows
to search for a station according to it's
type (e.g. music or education).
FM1
FM2
FM3
Radio mode on
To get to Radio mode press the
?
/MOD
button several times till you
see the prompt "Radio" on the display.
Automatic station searching
Press the
8
or
7
button to start the
searching into corresponding direction on
the frequency scale.
Manual station searching
Keep pressed the
8
or
7
button for
ca. 2 seconds to switch to manual station
searching mode.
Now using the
8
and
7
buttons you
can search for radio stations stepwise into
corresponding direction on the frequency
scale.
After ca. 5 seconds of inactivity the unit
switchs back to automatic station searching
mode.
Store the found stations
There are 6 memory cells per frequency
band. To store the current radio station
keep pressed the corresponding button
(M1-M6) on the remote control for ca.
2 sec. (alternatively you can use the
buttons 1, 3, 4, 5, 6 on the front panel
for that). On the screen appears the
number of the used memory cell where
the station was stored.
Radio mode
