5
Press the
and
button briefly to manually tune in to the desired station, or press and
hold the
and
buttons to scan automatically for the stronger stations. The scan stops
when the player reaches the next available station. If you press and hold one of the slot
numbers 1 through 6 for 2 seconds, the current station is stored in that location. The left part
of the display then shows CH1...6.
● The player can store up to 18FM radio stations. Press the
AMS/BAND
button repeatedly to
select either the
FM1, FM2, FM3
band. All of these options allow you to store 6 stations. If
you have chosen, for instance, Slot 4 of the FM2 band, then you later need to first select
the FM2 band by pressing the
AMS /BAND
button, then press the button for Slot 4, to
recall the station.
● If a memory slot is already in use, then its current value is cleared and the player stores the
new frequency there.
AUTOMATIC TUNING AND STORAGE
To start a scan and store the currently available FM stations, press and hold the
AMS/BAND
button for 2 seconds. You can follow the scanning and memorizing process on the display.
The radio searches from the current frequency and checks the signal strength until two cycle
search is finished, then the player automatically plays the first 5 seconds of every available
radio stations.
If there are enough channels available, the player will move on to FM2 and FM3 after filling in
the six slots of first band FM1.
● Keep in mind that the receiver may skip weaker stations, and you cannot influence the
order in which the stations are stored.
● If you wish to store a station in a particular slot, you need to manually tune in to its
frequency and store it.
● If you are using the receiver at a distant place from the location where you originally stored
a station (e.g., when you are traveling), you may need to find the same station again at a
different frequency. The same stations often air at different frequencies in different
geographical locations!
SELECTING A STORED FREQUENCY
Press and hold the button corresponding to the station's slot (1...6).Make sure to select the
right band (FM1/FM2/FM3/) first by pressing
AMS/BAND
.
● If you press and hold the preset Number's button for more than 2 seconds, the player will
not go to the stored frequency, but store the current frequency into the slot instead. This
overwrites the previously stored frequency.
【
MUSIC PLAYBACK(FROM USB/SD/SDHC/MMC STORAGE DEVICES)
】
If you wish to listen to MP3 tracks from a USB/SD/SDHC/MMC storage device and the FM
receiver is currently active, you simply need to connect the USB stick or insert the memory
card. The player detects this and starts playback automatically. The display then shows the
song name, the track's number and the elapsed time.
If both a USB stick and an SD/SDHC/MMC card is connected at the same time, the player will
