Unit on/off
Press the POWER button to turn the unit on. If the unit is already on, keep the POWER button
pressed for a couple of seconds to turn it down.
AUX input
The AUX input is a 3,5 mm jack plug on the front operating panel. Herewith you can connect the
unit with on of the external playback devices: MP3 player, smartphone, cellphone or tablet PC. An
adapter cable 3,5 mm jack-to-jack will be required.
Press the POWER / MODE button (perhaps several times) to get to AUX mode. If the external
device is connected with the unit, the playback is audible via car radio loudspeakers. The playback
control can be achieved via external device only.
Insert a micro SD card
Insert a micro SD card into the slot with the label side to the right and the pin side to the left.
Make sure that the card is intact and dirt-free.
Insert a USB flash drive
Insert an USB flash drive proper into a USB plug. Do not insert any heavy or big USB flash drives in
order not to hit it accidently - it could cause damages of the USB plug or USB flash drive.
Micro SD cards and USB flash drives should have following file-system format: FAT32 or exFat.
Other types will not be supported.
Following music formats are supported:
»» MP3 (with ID3 tags as well)
»» WMA
