Xomax XM-RD263 Скачать руководство пользователя страница 13

1

3

EN

Topic: 

Common solutions

Poor radio recep-
tion:

 

The radio tuner finds 
no broadcaster or the 
reception is poor.

For problem-solving regarding the radio reception it is 
important to know the type of the antenna of your vehicle.

 

 

Here are the possible solutions for each type of the antenna:

 

 

Type 1 – passive antenna:

 

We recommend you to substitude the existing antenna by the 
larger and therefore more efficient one. 

 

 

Shark fin or rod antennas (under 5 cm) are definitely insuffi

-

cient.

 

 

Type 2 – active antenna:

 

The vehicle provides no current for the active antenna. In this 
case a phantom power is required, which provides the active 
antenna with the external power supply.

 

 

Type 3 – active antenna with diversity system:

 

The unit provides no current for the active antenna and has 
no diversity support. For this type of antenna is required the 
phantom power with an integrated diversity system.

 

 

Note:

 

A phantom power is not to be confused with an antenna 
amplifier, which is far less efficient.

The unit does not 
turn on.

This problem is in most cases caused due to a wrong connec

-

tion of the ISO cable.

 

 

Please review the pin assignments of the ISO plug and ISO 
socket. Pay attention to the proper connection of the ignition- 
and steady plus and correct the discrepancy if required.

 

 

Note:

 

Though the design of ISO port is standardized, it's pin 
assigment is not and may vary. Thus in case of mismatch 
of connections due to different pin assignments a simple 
plug'n'play connection may lead to grievous errors.

Содержание XM-RD263















Отзывы: