-1
8
-
Touch Screen Operation
Automatic Memory Storing &
Program Scanning
3
RDS FUNCTION
Automatic Preset Setup
In Radio Mode, touch and keep (for more
than 2 ’ S) the screen of
“ ”
range to
active automatic station storage.
The radio searches within the current
frequency band, e.g. Fm , for the
stronger signal level until the search cycle
has finished . The six strongest stations
are then allocated to the corresponding
storage locations .
Then the station of the first storage
location is set .
Scan Function
In Radio mode, briefly touch the
“ ”
section on the touch screen , the radio
briefly plays all the preset stations of the
frequency band .
In home menu, touch the
“ ”
to
enter setup, tap to turn to radio
setting, select RDS on first, then the
message show as :
ADJUSTABLE ITEMS:
RDS REGION
Touch to switch the region area as:
EUROPE, USA, AMERICAN 1,
AMERICAN 2 and OIRT .
REG FUNCTION
at certain times some stations divide up
their programs into regional programs
with varying content .
REG ON :
the message “REG ON” will
appears in the display for a few seconds .
Note :
- the display capacity is limited . It is
possible that in the double display mode
some segments of the display are deleted .
- the function REG ON prevents the
radio from switching to alternative
frequency which have a different regional
program content .
REG OFF :
the program identification(PI)
of the regional program is ignored during
the search for an alternative frequency
(AF) or a program identification (PI) .
PI SET
Touch to change between PI MUTE and
PI SOUND .
PI MUTE / PI SOUND
(only for radio operation)
If you are in an area where two program
identifications (PI) overlap, you can
select the option
PI SOUND
and
PI MUTE
for playback of the sound.
Alternate switching of the program
identification should be avoided .
PI SOUND :
If switching nevertheless occurs the
sound of another station is heard for
less than one second .
PI MUTE :
the sound of another station is
suppressed .
