background image

3

XOMAX

XM-CDB618

Topic:

Safety instructions and precautions

EN

Safety instructions and 
precautions

!

 Handling by stop only

To avoid any accidents please don't 
handle the unit while you driving. 
Please stop and park the vehicle 
at safety place and handle the unit 
casually.

!

 Installation

Please read the following manual 
carefully before you install the 
unit. We recommend you to let the 
technician install the unit in your 
vehicle.

!

 Regular loudness

Please set the loudness of the unit 
to the appropriate level so you were 
still able to hear exterior noises 
especially traffic warning signals. 
Furthermore the higher loudness 
level can damage your hearing 
organs.

!

 Repair of the unit

Do not open the unit. Do not try to 
repair the unit by yourself due to 
any emerging technical problems. 
While opening the unit by yourself 
exists the danger to be electrocuted. 

Do not use the unit any further since 

you detect any kind of technical 
problems. 

Leave all the repair operations to 
professional technicians.

 

Due to flawed warranty seal the 

warranty becomes invalid.

!

 Power supply

Use the unit connected only to 12 Volt 
on-board power supply. The minus (-) 
should be connected with the ground 
(GND) (negative).

 

 

Due to the wrong configuration exists 
the danger of fire. In case of doubt 
please consult with professional techni

-

cians.

!

 Replacement of fuses

While replacing the fuse please make 
sure that the new fuse has the same 
properties as the old one, especially the 
amperage.

!

 Overheating

Do not occlude the vent holes to avoid 
the heat generation and accumulation 
in the unit. Otherwise exists the danger 
of fire.

!

 Regular temperature

Please make sure that the temperature 
inside of the vehicle amounts to not 
more than +60 C. 

If it's too hot inside of the vehicle, do 
not turn the unit on until the inside 
temperature of the cabin descends.

!

Содержание XM-CDB618



















Отзывы: