background image

4

EN

Topic: 

Safety instructions and precautions

!

 Cleaning of the unit

Please keep the unit clean and remove 
the dust from it regularly. Please use for 
that a soft and dry cleaning rag. 
 
Major soilings can be removed carefully 
with the wet cleaning rag. Do not use 
any chemical or alcohol-containing 
detergents to avoid the damage of the 
unit's varnish.

!

 Usage of the touchscreen

Do not press the touchscreen too hard 
– it may lead to image distortions, unit 
malfunctions and touchscreen damages. 
 
Do not use any sharp articles to use 
the touchscreen. Please handle the 
touchscreen with your finger or with the 
appropriate stylus.

!

 Moisture

To avoid the danger of fire or the 
electric shock do not put the unit in to 
the moist environment (e.g. adverse 
weather conditions, inappropriate wet 
cleaning etc.)

!

 The risk of injuries

Do not open the cabinet or modify the 
unit. The active laser components used 
with this product comply with the 
provisions of Laser Class 1.

!

 Handling the CDs and DVDs

      Remove transport securing 
screws (if available)

Before using the optical drive, be 
sure to remove the two transport 
locking screws marked with colored 
stripes (top of the radio).

!

Содержание XM-05ZA













Отзывы: