Xolid XEKI508051-4-5FLEX, Инструкция по использованию и установке, Страница: 32 / 68

32
•
Start up / switch off a heating zone:
Action Control panel Display
Zone selection Press [ 0 ] of the selected zone [ 0 ] and control light
on
To set
Slide on the “SLIDER“ [ 0 ] to [ 9 ]
(adjust the power) to the right or to the left
To stop Slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
or press on [ 0 ] [ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
•
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
•
If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After swittching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Booster and Double Booster function
The Power function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 5 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles
•
Start up / Stop the booster Power function:
Action Control panel Display
Zone selection Press key [ 0 ] from the zone [ 0 ] and control light on
Start up the Booster Press key [ ] [ P ] during 5 min
Stop the Booster Slide on the “SLIDER“ [ P ] to [ 0 ]
Or press [ P ] [ 9 ]
•
Start up / Stop the double booster function:
Action Control panel Display
Zone selection Press key [ 0 ] from the zone [ 0 ] and control light on
Start up the Booster Press key [ ] [ P ]
Start up the Double Booster Re-press key [ P ] [ ]
Stop the Double Booster Slide on the “SLIDER“ [ P ] to [ 0 ]
Or press [ ] [ 9 ]