XOCECO PH-50HU31S, Руководство по обслуживанию

Страница: 6 / 32

4
3.1 Initialization
Enter factory menu, select “OPTION” and “HOTEL OPTION” sub-menu, adjustment of items to see
table1.
Table1 sub-menu adjustment
Items Preset Introduce
HOTEL 0 1: HOTEL OPTION of factory menu is optional
0: HOTEL OPTION of factory menu is not optional
LOGO 1 1: display LOGO in no signal or turn on
0: no LOGO display
ADC PRESCALE 00A Adjust according different power consumption
SIF PRESCALE 000 Adjust according different power consumption
BACK LIGHT 28 Adjust according different screen
ALL COLOR 1 1: white balance of each channel auto offset based on the HDMI white
balance
0: white balance of each channel adjust the offset base separately
ISP 0 0: no unit upgrade on the assembly line
1: unit upgrade on the assembly line
NO STANDY 00 01: turn on; 00: memory function of turn on; 10: standby
INIT VOLUME 0-100 Volume of turn on
INIT CHANNEL 1-200 Channel of turn on
INIT SRC Source Source of turn on
EEPROM-MEMORAY
RECALL
> EEPROM Initialization (operate when EEPROM data chaos)
3.2 Adjustment for AFT voltage and AGC voltage of IF channel in TV
3.2.1 IF AFC adjustment
Disconnect J401(B face), input 38.9MHz PAL signal of 80dB from J401 near the socket, Adjust
L404 to value 0.9V of TP402. Enter factory menu, adjust TDA4470 from BG to LL, input 33.9MHz
SECAM signal of 80dB, adjust RP402 to value 0.9V of TP402, then wed J401.
3.2.2 IF AGC adjustment
Input 184.25MHz RF signal of 60DB from RF terminal, adjust RP401 to value 4V of TP404
and there should be no obvious snowy picture. Increase the signal to 90DBV and it should be
display normally and no obvious noise.
3.3 White balance adjustment
3.3.1 white balance adjustment of HDMI
a. Input VG-848 signal from HDMI: TIMING854(800* 600/60Hz) and eighth level gray-scale
signal of PAT920. Use color analyzer CA210 to adjust white balance.
b. Enter submenu of COLOR TEMP., Select 9300k of color temperature
c. Fixed value of B GAIN, adjust R GAIN and G GAIN, let the color coordinate of the seventh
level be 285 and 293. Fixed value of B OFF, adjust R OFF and G OFF, let the color coordinate of
second level be 285 and 293 and the brightness be about 3nit-10nit. Adjustment R GAIN, G GAIN,
R OFF and G OFF repeatedly until the value of the two levels gray-scale be 285 and 293.
3.3.2 VGA/YPBPR/AV white balance check and correct
a. Input VG-848 signal of VGA: TIMING854(800* 600/60Hz) (PATIERN:CROSS) and auto