Xo XOGRILL32XLT, Руководство по эксплуатации и установке

Страница: 29 / 48

29
lighting the burners
WARNING
• Always keep the hood open when lighting the grill.
• Never leave children unsupervised around the XO grill.
Do not store items of interest to children around or below the grill, or in the cabinet.
Never allow children to crawl inside a cabinet or enclosure.
CAUTION
• Never light the grill if you smell gas.
• Keep face and body parts away from the grill when lighting.
• Never leave the grill unattended.
LIGHTING THE MAIN GRILL BURNERS:
1. Open grill hood . DO NOT ATTEMPT TO LIGHT GRILL WITH THE HOOD CLOSED.
2. Check to ensure that all burner control knobs are set to OFF.
3. Turn on main gas supply.
4. Push in and hold knob for 2 seconds
5. After 2 seconds, while holding the knob in, turn the knob counterclockwise 1/4 turn.
You will hear the "CLICK" and the burner will ignite. Release knob.
6. If burner does not light, turn knob to OFF, wait 5 minutes for gas to dissipate, and repeat step 4.
LIGHTING THE BACK INFRARED BURNER:
Always preheat the grill for best results.
Before begining - wipe the top of the grates with a light coating of a high temperature oil like canola.
To preheat the grill, light all main burners and set to HIGH. Close the hood and preheat for 10-15 minutes,
or until the grill reaches desired temperature.
After preheating, turn off all burners not required, carefully open the hood, and adjust remaining burners
to desired temperature.
Do not leave the grill unattended during the preheat cycle or at any time while the grill is in use.
Do not allow grill to preheat for prolonged periods of time. Overheating the grill can cause damage to
the grill and personal property.
1. Open grill hood . DO NOT ATTEMPT TO LIGHT GRILL WITH THE HOOD CLOSED.
2. Check to ensure that all burner control knobs are set to OFF.
3. Turn on main gas supply.
4. Push in and hold knob for 2 seconds
5. After 2 seconds, while holding the knob in, turn the knob counterclockwise 1/4 turn.
You will hear the "CLICK" and the burner will ignite.
Continue to hold the knob in for 30 seconds until the burner ignites completely, then release.
6. If burner does not light, turn knob to OFF, wait 5 minutes for gas to dissipate, and repeat step 4.
IF BURNERS ARE NOT IGNITING AFTER TWO ATTEMPTS - YOU CAN ATTMPT TO LIGHT THE
BURNERS MANUALLY AFTER WAITING 5 MINUTES FOR GAS TO DISSAPATE.
IF THE BURNERS STILL WILL NOT LIGHT - SHUT OFF THE GAS SUPPLY & CALL FOR SERVICE
•
•