- 15 -
Fig.3:
Put together the two parts
of the air deviator as shown in
picture
no 3.1.
It may be neces-
sary to cut the deviator to fit the
width of the chimney as shown
in picture
3.2.
A sharp blade or
Hacksaw is recommended to
trim the plastic.
Fig.4:
Take the air diverter
A
and drill two holes as
shown in the figure (hole diameter:
1/4" inches
).
Once the two holes have been drilled, fasten the
air diverter
A
to the bracket
H
.
Fig.5:
Fasten the air diverter
permanently to the wall with a
screw (the hole previously drilled
in
Fig.2
).
Fig.6:
Once the air diverter has been inserted
into the bracket and fastened to the wall connect
the flexible (
6" ROUND FLEXIBLE METAL DUCT
PIPE NOT INCLUDED
) pipe to the diverter, use
duct tape to seal.
6" ROUND
FLEXIBLE
METAL
DUCT PIPE NOT
INCLUDED
Содержание XOB30SMUA
