Xo T1830S, Инструкция пользователя

Страница: 9 / 33

- 9 -
INSTALLATION INSTRUCTIONS
INSTALLATION - VENTED TO THE OUTSIDE
1. ATTENTION!
- Before carrying out assembly operations, open the packaging, take the hood and place
it on a comfortable surface.
- Remove the anti-grease filter/s
(Fig.1A) .
A - If hood installation is used with the air outlet Fig.1B or Fig.1C , the wires set-up in
the relevant fairleads must be released by pulling the lever outwards, as indicated in
figure 2 - phase 1-2.
B - Disconnect the 6-way quick coupling of the motor located inside of the hood, as
show in figure 2 - phase 3.
C - The wires positioned inside of the hood are fasted with a cable tie. Cut the cable tie
as shown in figure 2 - phase 4.
Once transformation operations have been terminated, reassemble the components fol-
A
C
D
X
Y
B
2
4
I
Y
3
1
I
1
Fig.1