Xo SINK PRO NANOGRIND, Инструкция по эксплуатации и установке

Страница: 7 / 12

CONNECTING THE DISPOSER TO THE SINK FLANGE
www.xoappliance.com
1. ATTACH TO THE SINK FLANGE. Lift the Disposer into place and rotate the Mount Ring until the slots
in the Mount Ring line up with and drop over the lugs protruding from the hopper.
2. Rotate the Mount Ring approximately 1/4” to the right. This will hold the Disposer in place while allowing
the Disposer to turn with the Mount Ring .
3. Rotate the Disposer with the Mount Ring to position
the Discharge Elbow so that it lines up with the outlet
drain trap.
4. LOCK THE MOUNT RING. Once the disposer is positioned to line up with the drain, using the ears on
the Mount Ring rotate the Ring to the right (counterclockwise) until the lugs are seated at the extreme
left hand side of the Mount Ring Slots. If they are difficult to turn, use a small amout of petroleum jelly or
dishsoap to lubricate the lugs.
5. Connect the Discharge Elbow to the drain trap and the dishwasher discharge hose (if applicable) to
complete the plumbing connections and run water to check for leaks. Repeat inspections for leaks for
the initial 24 hours of operation.
MOUNT RING SLOT
MOUNTING LUG
ON HOPPER
MOUNT RING SLOT
MOUNTING LUG
ON HOPPER
ALIGN DISCHARGE ELBOW
BEFORE LOCKING
MOUNT RING DETAIL
LUG IN UNLOCKED POSITION
LUG IN LOCKED POSITION