XO Appliance XOI33SC, Руководство пользователя

Страница: 15 / 68

- 15 -
installation continued
24-1/4”
- 30-1/4”
11-9/16”
B
H
A
E
Min - 0-1/2"
Max - 1-0/16"
C
F
F
D
E
B
B
E
2• Fixing of the hood in the lower part of the kitchen cabinet:
Fo r all measurements relating to the cooker hood, please refer to pag.11 .
Before fixing the cooker hood to the lower part of the cabinet, the following steps should
be performed:
1. Remove the 4 screws
E fixing the two cooker hood brackets H (RHS and LHS) in place
as indicated in Fig.2A .
2. Remove the brackets H as shown in Fig.2B .
3. Make sure the thickness of the cabinet falls within the range of values listed in Fig.2C .
Fit the cooker hood in the cabinet (Fig.3) and make sure the 4 springs are fixed in place
well. Fix the cooker hood to the cabinet securely by using a screwdriver to tighten the
screws
M until the appliance is flush with the cabinet. Place again the 2 brackets H (right
and left) of the hood and fix them with the 4 screws E (Fig.4 - Fig.5) .
When installed in this way the appliance discharges fumes outside, either through a
perimeter wall or existing ducting.It is therefore necessary to purchase a non-flammable
air exhaust tube
A (not supplied) which complies with all current legislation and connect
it to flange B (Fig.1) .
2