XO Appliance XOE2 Скачать руководство пользователя

Страница: 23 / 24

- 23 -

NEED PARTS OR SERVICE

VISIT WWW.XOAPPLIANCE.COM and click on PARTS STORE

OR CALL US AT 973-403-8900

trouble shooting

HOOD WILL NOT OPERATE:

Check to see if the power supply is connected properly.

Is the power turned on at the breaker / fuse box?

Check wiring between the switch and control board.

HOOD VIBRATES WHILE RUNNING:

Is the hood secured properly to the wall / cabinet?

Is the blower motor securelty fastened?

Is the fan damaged and out of balance?

HOOD IS NOT MOVING MUCH AIR:

Is the duct undersized?

Is the duct or wall cap clogged with debris?

Is the damper opening properly?

THE LIGHTS WORK BUT THE BLOWER DOES NOT:

Check if the fan is scraping or jammed.

If the fan spins freely, the motor may need replacement.

THE HOOD IS NOT VENTING PROPERLY:

Check the hood mounting height. (see page 10)

Does the ducting comply with all the recommendations in this manual?

Is the outside wall vent opening against the wind?

Are you using the high speed setting during heavy cooking?

Is there a cross draft from open windows or doors?

LIGHTS ARE NOT WORKING PROPERLY:

If the light bar is partially lit - replace the light bar module.

If the light bar not lighting at all, Check wiring between the switch and

control board. If the connections are sound - replace the light bar module.

If that does not resolve the issue, call for service.

Содержание XOE2

























Результаты поиска

Содержание XOE2

Отзывы:

Похожие инструкции для XOE2

Бренды по названию

Популярные бренды

XO Appliance XOE2, Руководство пользователя

Результаты поиска

Содержание XOE2

Отзывы:

Похожие инструкции для XOE2

Бренды по названию

Популярные бренды