XnetSolutions SX-GATE, Руководство пользователя

Страница: 384 / 480

14.5.5 Domains 384
14.5.5-E Sender addresses
Mapping of sender addresses
You can change the sender address of emails here. Each entry in the list consists of
two values: the address to rewrite and the new value.
Any sender address mapping configured for the rewritten
address is ignored. There's no chaining of rewrite actions.
Rewritten sender of all other addresses *@
…
All sender addresses which don't match an entry in the list above can be rewritten to
a specific sender address. If you only want to change the domain part of the sender
address, regardless of the actual sender, enter "*@DOMAIN", e.g. "*@example.com".
The local part before the "@" character is not modified in this case.
Any sender address mapping configured for the rewritten
address or in the rewritten domain is ignored.
14.5.5-F Provider relay
Relay server for sender domain "
…
"
In exceptional cases it might be necessary to send outbound emails via different relay
servers, depending on the sender domain.
Some emails such as disposition status notifications or non
delivery reports are sent without sender address. Hence these
emails will not be forwarded to a domainspecific relay, even if
the original mail was related to the domain.
Relay Server port
If the relay server doesn't accept connections on standard port 25, you can fill in the
required port here (usually 587).