XNET SG9224B, Руководство пользователя для веб

Страница: 47 / 53

47
z
Group ID: There are seven trunk groups to provide configure. Choose the "group id"
and click "Send".
z
Work ports: Allow max four ports can be aggregated at the same time. If LACP static
trunk group, the exceed ports is standby and able to aggregate if work ports fail. If local
static trunk group, the number must be as same as the group member ports.
z
Select the ports to join the trunk group. Allow max four ports can be aggregated at the
same time.
z
LACP: If enable, the group is LACP static trunk group. If disable, the group is local
static trunk group.
z
If LACP enable, you can configure LACP Active/Passive status in each ports on State
Activity page.
Link Aggregation Control Protocol (LACP) is part of an IEEE specification (802.3ad) that
allows you to bundle several physical ports together to form a single logical channel. LACP
allows a switch to negotiate an automatic bundle by sending LACP packets to the peer. It
performs a similar function as Port Aggregation Protocol (PAgP) with Cisco EtherChannel.
S. VLAN
VLAN configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast
domain. It allows you to isolate network traffic so only members of the VLAN
receive traffic from the same VLAN members. Basically, creating a VLAN from a
switch is logically equivalent of reconnecting a group of network devices to
another Layer 2 switch. However, all the network devices are still plug into the
same switch physically.
47