Xmultiple Technologies, Inc.
1060 Los Angeles Avenue, Simi Valley, CA 93065, 805 579-1100, www.ixp1.com
Buckle for strap.
Operation Instruction:
A.
i.
Turn on the Bluetooth feature on your devices.
ii.
Hold this button in 8 seconds to turn on this speaker, LED light will be left and right
twinkling then to pair/connect your device with this speaker;
iii.
Your device will search this speaker ( PowerShark M10)
iv.
Pair and contact to the PowerShark M10, if prompted need password, Please enter
“0000”;
v.
The connection succeeds, and
it’s ready to play music.
(Note: The above are the general steps for pairing with Bluetooth devices, for the specific
instruction of Bluetooth connection for your device, please refer to the device
manufacturer’s
manual.)
B.
C. After the connection succeeds, you could play music through this speaker from PC or
other devices, during playing music, you could control the actions via the three buttons,
like Play / Pause / Previous Song / Next Song / / Volume -.
D. Attention
1. If the Bluetooth is disconnected when turning off the power, it could be re-connected
over 30 seconds later.
2. Most of Bluetooth devices will connect with this s
peaker automatically after they’re
paired once; while for a few brands of mobile phones, they could not connect
automatically, and need to connect manually again.
3. For most of Bluetooth devices, when the connection succeeds, users could control
Play / Pause / Previous Song / Next Song through this speaker; while for a few
