XTAG-2 Quick Start Guide (9.9)
1
Introduction
The XTAG-2 debug adapter is a simple adapter card based on an XS1-L1 64TQFP
event-driven processor device. It can be used to connect XMOS development boards
with an XSYS2 connector to PCs, providing a JTAG interface to the board and a 5V
power supply from a USB 2.0 port.
XS1-L1
LQ64
USB Transceiver
20-way
IDC XSYS
Connector
Standard A-Type
USB 2.0
Connector
XTAG-2 Connector
This document explains how to install the XMOS Design Tools and software drivers for
the XTAG-2. Further information on XTAG-2 is available from
1.1
System Requirements
•
XMOS Design Tools (version 9.9 or later)
•
Development board with XMOS XSYS2 Connector
www.xmos.com
