XMOS Audio Interface - Quick Start Guide (1v0)
3/8
2
Getting Started
Download and install the demonstration software from the XMOS website, according
to your license agreement.
To use a USB or AVB input, remove the back of
the XDK and set DIP switches as required—see
Figure
3
.
Replace the back cover.
Connect your USB or AVB input device to the
XDK. If you are using a USB device connect it to
the USB port on the right-hand side of the XDK.
If you are using an AVB device connect it to the
Ethernet RJ45 socket to the right—see Figure
2
Connect the XAI to the XDK using the 64-way
IDC cable supplied.
Connect additional audio input and output de-
vices to the XAI—see Figure
1
for details of
input and output connectors.
Plug-in the XDK using the 12V power supplies
provided with the Kit.
Switch on the XDK and wait for the LEDs to
flash to indicate that the devices is initialised.
The kit is now ready for use.
www.xmos.com
