If you see message “IPC is already in channel!”, it means the camera has been added to the NVR successfully. You can then click “Exit” to
leave the interface. In Device Manage interface, you will see the camera with IP address 172.20.14.xx show up in bottom box. As shown
in below picture:
B.
How to control the PT camera locally and remotely
Please note that the PT camera does not pan or tilt automatically, you need to control it to pan and tilt manually,
either from the monitor/TV, or from your app.
Control the PT camera locally on your monitor/TV:
Right click the NVR mouse, then click PTZ control.
