xmartO PT camera (WP1324) Quick User Guide
A.
How to add a PT camera to your existing system
1.
Plug the PT camera to power and hard wire it to your NVR with a network cable (Plug the network cable to the LAN port if your NVR
has 4 Ethernet ports; Plug the network cable to the WAN port if your NVR only has one Ethernet port.).
1.
Go to your system, right click the NVR mouse, then click Device Manage. Click “Refresh” on upper right to search for this camera. After
a while, you’ll see the camera with IP address 192.168.1.168 show up in upper box. As shown in below picture:
