XM Satellite Radio XM2go X2G-100B, Руководство пользователя

Страница: 25 / 47

U
sin
g
y
o
u
r X
M
2g
o
w
ith
a
P
C
49 48
U
sin
g
y
o
u
r X
M
2g
o
w
ith
a
P
C
Click here to begin the
installation.
Click here when you’re
finished with the
installation procedure.
Follow the directions indicated on the screen. If you have any questions about the
XM+Napster software, see the XM+Napster FAQs at http://napster.xmradio.com.
Setup
We recommend reading this entire section before using your XM2go with a PC.
To connect your XM2go to your PC:
1. If you haven’t done so already, disconnect your XM2go and its dock from your PC.
2. Insert the XM+Napster CD into your computer’s CD or DVD drive.
3. The software should start automatically. You should see the following screen on your PC:
4. Reboot your PC if necessary, then launch the XM+Napster program from the shortcut on
your desktop.
5. Set up XM2go as shown and plug the USB cable into the PC. You can also connect the
USB cable directly between your PC and XM2go without using the home dock, home
antenna, and AC power adapter.
6. Your PC should recognize XM2go. Close any file folders that appear on your screen. You
can manage the contents of XM2go entirely by using the XM+Napster program.
7. When taking your XM2go with you, you must disconnect XM2go from the PC by following
the procedure described in “Disconnecting Your XM2go from the PC” (page 60).
WARNING: Only use the USB cable supplied in the package. Other USB cables may not allow
your XM2go to charge its battery or communicate with your PC.