XM Satellite Radio onyX XDNX1, Руководство пользователя

Страница: 32 / 114

32
• Sedan/Coupe With Antenna Placed at the Front of the Roof:
1 . Feed the antenna cable from the antenna underneath the rubber
molding around the windshield . Use a blunt plastic putty knife or
similar blunt tool to lift the rubber molding around the windshield
and tuck the antenna cable underneath the molding . Route the
antenna cable around and down the windshield to the lowest point .
2 . At the lowest corner of the windshield, route the cable out of the
windshield molding and into the rubber weather stripping around
the door opening . Lift the weather stripping from the opening and
tuck the cable inside it,
then replace the weather
stripping . Run the cable
inside of the weather
stripping to the bottom of
the door opening .
3 . Pull the cable out of the
weather stripping at
the bottom of the door
opening and route it under the carpet toward the dashboard . Coil
any excess cable in a hidden location, such as under the carpet,
keeping it away from any vehicle pedals or controls . Secure the
excess cable with wire ties .
4 . Bring the end of the cable out at the PowerConnect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it
to the antenna connector of the dock .
Vehicle Installation