18
2)
Wall Mount Switch
Should you need to control with wall mount switch, please follow the
instructions below to pair wall mount switch and the lift.
a)
Press and hold the Programming button at the back of the hand held
transmitter ( remote control) until the lift begins to move briefly.
b)
Press and hold “PROG” button on back of the wall switch until the lift
begins to move briefly. The setting is memorized by wall switch.
NOTE: Please visit the following link for video instructions on XLT scissor lift limit
settings. The procedure to reset the limit setting for X Cube lift is the same as that of
scissor lift.
http://www.youtube.com/watch?v=AfSyawTEtKU
UP button
DOWN button
SHOW button
PROG
button
Wall Switch
Back of Wall Switch
