XLT Ovens XLT Gas Oven, Руководство по запчастям и обслуживанию, Страница: 18 / 72

18 HOOD THEORY OF OPERATION (STD W/FS)
Switch Relocation Cord (SRC) connects into these. This deactivates the main oven switch located
on the oven and relocates the operation of it to the HUI. This capacitive touch (NO) switch is lo­
cated on the front of the hood and controls the lights.
TS 1 & 2- These are terminal strips, that serve as a connection point for wires.
VFD - The Variable Frequency Drive (VFD) converts the AC supply voltage to DC and then con­
verts the DC to a suitable three-phase frequency source for Ml. Incoming power connects to ter­
minals LI & L2. Ml connects to terminals Tl, T2, & T3 through TSI. The HMC sends the com­
mand to the ModBus to set the frequency for the combination of ovens selected. The VFD can re­
ceive a signal from the fire suppression system to command the drive to run at 60 Hz. A complete
manual can be found at www.x lt o v ens.com .
Exha ust Fan Speed
Exha ust Fan On
Ala rm Mute
Error Informa tion
40 Hz
).. rh
.
� �
.
CD
□□□
Figure 1
XLT Logo
Oven Off (Outline)
Oven On (Filled)
Hood Lights
Technical Support US: 888-443-2751
S i mple . Smart .
Technical Support INTL: 316-943-2751