1. Technical details
2. Maintenance, care, storage and transport
ATTENTION!
•
Use only a dry and soft cloth for cleaning.
•
Do not use any cleaning agents or chemicals.
•
Store the product in a cool and dry place.
•
Store the product out of reach of children and in a dry and dust-
protected environment when not in use for a longer period.
•
Keep the original packaging for transport.
3. Disposal information
According to the European WEEE Directive, electrical and
electronic equipment must not be disposed of with
household waste. Their components must be recycled or disposed of
separately, because toxic and hazardous components can cause
lasting damage to health and the environment if disposed of
improperly. As a consumer, you are obliged under the Electrical and
Electronic Equipment Act (ElektroG) to return electrical and electronic
equipment free of charge at the end of its service life to the
manufacturer, the point of sale or to public collection points set up
for this purpose. Details are regulated by the respective state law.
The symbol on the product, the operating instructions and/or the
packaging indicates these regulations. By separating, recycling and
disposing of old equipment in this way, you are making an important
contribution to protecting our environment.
Packaging can be disposed of free of charge at the appropriate
collection points - paper in the paper garbage can, plastics in the
yellow bag and glass in the used glass container.
4. Packing
5. EG - Declaration of Conformity
With the CE mark XLOCK, a registered trademark of
datamobile, declares that the product meets the essential
requirements and directives European regulations.
6. Packaging accessories
7. Safety information
Minimum distance
To avoid interference
between the locks, keep
a minimum distance of
10 cm. The battery can
otherwise be quickly
discharged.
Storage
A minimum distance is also mandatory for storage. Do not insert the
battery until before commissioning.
Mounting the lock
Tighten the screws with feeling and do not use drills or
cordless drill or cordless screwdriver.
Disposal
The locks contain electronic
components and belong in the electronic waste.
Instruction manual - EN
Please scan the QR code with your
Smartphone and a website with all
the information will open.
If you are working on a PC, you can
click on the QR code and a website
with all the information will open.
8. Mounting instructions
© XLOCK,
Errors and misprints excepted
XLOCK 40 MifareFlex
Locking part
with 3 screws
1x screwdriver
Lock with 4 screws
>
10
c
m
Dimensions (HxWxD) Lock: 110 x 110x 21 mm Locking part: 33x 20 x 9 mm.
Weight
ca. 200 g ( locking part, battery, screws)
Temperature
-10 °C to +55 °C (14 °F to 131 °F)
Humidity
20% to 75% relative humidity, non-condensing
RFID frequency
13,56 MHz Mifare®, NFC, LEGIC ISO14443a
Battery
3V - CR123A lithium battery. Up to 20,000 openings. Up
to 2 years at +20 °C (68 °F) depending on temperature,
function used and frequency. Lock automatically signals
and opens when battery LOW.
Programming
3 programming cards, 47 user cards, 5 emergency opening
cards, various service cards.
Operating mode
adjustable with service
cards.
Mode 1: Fixcode with automatic closing
Mode 2: Fixcode without automatic closing
Mode 7: Freelocker Mifare Classic with cabinet occupied
Mode 8: Freelocker like mode 3 and opening after X time
Mode 9: Freelocker for Mifare Desfire without occupied
Mode 10: Freelocker like Mode 9 and opening after X time
Read distance
For Mifare Classic ID cards up to 3 cm, for Mifare Classic
key fobs up to 2.5 cm. For Mifare Desfire ID cards up to
1.5 cm, for Mifare Desfire key fobs up to 1 cm.
Please always check the reading range!
Important!
RFID reading distance for Mifare Classic key fobs up
to 25 mm. For Mifare Classic cards up to 30 mm. For
Mifare Desfire media, we recommend recessing the
antenna or using an external antenna. Range see
technical data ->
Always check the reading distance with the
corresponding transponders after installation!
Sticker
