1. Technical details
2. Maintenance, care, storage and transport
ATTENTION!
•
Use only a dry and soft cloth for cleaning.
•
Do not use any cleaning agents or chemicals.
•
Store the product in a cool and dry place.
•
Store the product out of reach of children and in a dry and dust-
protected environment when not in use for a longer period of time.
•
Keep the original packaging for transport.
3. Disposal information
According to the European WEEE Directive, electrical and
electronic equipment must not be disposed of with household waste.
Their components must be recycled or disposed of separately,
because toxic and hazardous components can cause lasting damage
to health and the environment if disposed of improperly. As a
consumer, you are obliged under the Electrical and Electronic
Equipment Act (ElektroG) to return electrical and electronic
equipment free of charge at the end of its service life to the
manufacturer, the point of sale or to public collection points set up
for this purpose. Details are regulated by the respective state law.
The symbol on the product, the operating instructions and/or the
packaging indicates these regulations. By separating, recycling and
disposing of old equipment in this way, you are making an important
contribution to protecting our environment.
Packaging can be disposed of free of charge at the appropriate
collection points - paper in the paper garbage can, plastics in the
yellow bag and glass in the used glass container.
4. Packing
5. EG - Declaration of Conformity
With the CE mark XLOCK, a registered trademark of
datamobile, declares that the product meets the essential
requirements and directives European regulations.
6. Packaging accessories
7. Safety information
Minimum distance
To avoid interference
between the locks, keep
a minimum distance of
10 cm. The battery can
otherwise be quickly
discharged. Up to 15
meters with Bluetooth.
Storage
A minimum distance is also mandatory for storage. Do not insert the
battery until before commissioning.
Mounting the lock
Tighten the screws with feeling and do not use drills or
cordless drill or cordless screwdriver.
Disposal
The locks contain electronic
components and belong in the electronic waste.
Please scan the QR code with your
Smartphone and a website with all
the information will open.
If you are working on a PC, you can
click on the QR code and a website
with all the information will open.
8. Mounting instructions, APP installation
…
© XLOCK,
Errors and misprints excepted
XLOCK 146
BLE, NFC,PIN, Gateway
Dimensions
(HxBxD)c
Lock: 110 x 110 x 21 mm , Locking part: 33 x 20
x 9 mm. Keypad 101 x 68 x 19,6 mm.
Weight
ca. 400 g (locking part, keypad, battery and
screws included in the set)
Temperatur
-10 °C bis +55 °C (14 °F to 131 °F)
Humidity
20% to 75% relative humidity, no condensation
Bluetooth-Variante
Bluetooth Low Energy(BLE), Nordic Chipset
Battery
2 x CR123A 3V lithium batteries. 30,000
openings. Up to 2 years at +20 °C (68 °F)
depending on temperature, function used and
frequency. Battery status is displayed in the app.
App / Cloud System
XL Lock Manager APP, Webservice:
; Made in Austria
Size of memory
Up to 200 RFID users, unlimited for XL Lock
Manager App users.
Read distance
Up to 15 meters range with Bluetooth.
Locking part (S2)
with 4 screws
1x screwdriver
Lock with 3 screws
Important!
RFID reading distance
Mifare key fobs up to 10-20 mm
Mifare cards up to 20-30 mm. Always
check reading distance after
mounting!
>
1
0
c
m
Instruction manual - EN
