XK041002 / XK041005 Single Color Undercar & Interior Kit
2
Mounting Instructions
1.
Test all components before mounting:
As shown below, plug all light units together and connect them to
the controller. Plug the controller into 12V car cigarette lighter socket. Turn on the switch and push the Mode
button to exam all the lights. If the light has any defective issue, please contact us and we will be happy to
replace them for you.
2.
Plan mounting locations:
Disconnect the tested lights and remove any bodywork that will have the LED
lights located behind them. Clean the mounting surface. LOOSELY mount the LED lights using Scotch or
painters tape (not included) to the desired locations. (DO NOT firmly attach the lights in this step.) Drill
mounting screw holes based on the planned spots.
3.
Mount the lights:
Clean the mounting surface again. Use the included double side tape pads to attach the
lights to the planned locations. Apply the included screws and mounting brackets to firmly mount all tubes to
the surface (
required
). Connect all Y-splitters, extension wires and the switch wiring harness.
4.
Secure all wires and connectors:
Neatly mount and hide any loose wires.
Use provided 3M tape to tape every connector together. Make sure the
wires and light tubes are not touching anything hot or located on moving
parts. Cover the end of each tube with provide end cap.
5.
Connect to 12V DC power:
Firmly connect the wire terminals to the
power socket and enjoy the light.
Visit
www.XKGLOW.com
to purchase extra lights and accessories.
