xjump XJ 100, Руководство пользователя

Страница: 15 / 44

X
J
10
0
15
BLUETOOTH
BLUETOOTH CONNECTION METHODS
1. Power On the speaker, the working state Led (6) will flash in Green;
2. Enable Bluetooth on your mobile device (mobile phone, PC, Tablet) to search Bluetooth device;
3. Search for Bluetooth devices and select “XJ 100”; the device will automatically pair and connect.
Successful connection will deliver reminding tone and the working state Led (6) will turn to
Green (In general case, no password is needed; for special mode, output password, input “0000”);
4. The successfully paired device can be automatically connected for the next switch-on.
Note:
- The speaker will power off automatically if no connection withing 20 minutes.
- Press and hold button (7) 2 seconds, the speaker will disconnect with the Bluetooth device, other
Bluetooth device will connect with the speaker.
COMANDS AVAILABLE IN BLUETOOTH MODE
- Press and hold the key (3) for a few seconds to go to the next song, keep the key (4) pressed
for a few seconds to go to the previous song;
- Press the button (1) to pause, press it again to resume playback .
HANDS-FREE MODE FOR CALLS
If connected to a telephone, you will hear a beep when a call is received.
- Press the button (7) once to answer an incoming call, press it again to end the call ;
- Press and hold the button (7) for 2 seconds to reject the call.
English