XIT 404’s VIDEO PENTAMIRROR - LIGHT AND MOTION
HD MONITOR BACK VERSION 2 WARRANTY
www.xit404.com
Revsion 2.0 - JUL2013
FDM parts - a brief description
Xit 404 manufactures a number of its parts using a process called Fused Deposition Modeling (FDM) This process involves extruding a thread of plastic and laying
it down in thin layers to build a part. This enables us to supply you products that enhance your underwater photography and videography.
Care and Maintenance
The FDM part is impact resistant and will withstand most drops from table height. However, as with all plastic parts, they cannot withstand excessive pressure and
force without breaking. Being careful means handling the product during assembly with a light touch, do not force.
If your part gets wet let it drip-dry for about an hour. If you have to pack it before it is dry then wrap it in something absorbent such as a paper towel, t-shirt or sock
and put it into a plastic bag. This will keep your other parts from getting dripped on.
FDM Plastic Part Warranty
FDM parts are guaranteed to be free of manufacturing defects for a period of one year from date of purchase. Unnecessary force can cause excessive wear and
possibly break the parts voiding warranty. Damaged or broken parts will be inspected. If Xit 404 determines that the parts were misused or abused, warranty will
be void. Valid purchase receipt is required for all warranty claims.
Care and Maintenance For your PentaMirror - in and out of the water
1. First is to take the necessary precautions while handling your housing with a PentaMirror attached. Since it sits proudly off the back of your housing it is prone
to accidental bumps and hits. The PentaMirror was designed to pop off if it gets bumped. Just pop it back on if this happens.
2. Second is cleaning your mirrors. They are plastic and can scratch easily – always use a soft cloth to clean them if needed. While on a dive do not touch the
mirrors! If they get silted up or have air bubbles – swish your hand back and forth to push water over them, this will dislodge silt and air bubbles.
3. If they become scratched you may be able to fix them with a scratch remover compound available at most underwater camera dealers. This is the same
compound used to polish dome ports. Of course you can always replace them.
4. Once you are done diving and want to pack your PentaMirror, let it drip-dry for about an hour. If you have to pack it before it is dry then wrap it in something
absorbent such as a paper towel, t-shirt or sock and put it into a plastic bag. This will keep your other parts from getting dripped on.
Replacement Parts
Product Description
Part Number
Video Mirror, Plastic, 2 x 3.25
PR000100
Aqua Pencil Tether, Red
AT0001RD
If you wish to purchase replacement parts or have any questions about your
PentaMirror or Viewfinder Plug, please contact your local Xit 404 Dealer.
PENTAMIRROR BOX
PENTAMIRROR
MIRROR (2X)
PENTAMIRROR
COVER
