FDM parts - a brief description
Xit 404 manufactures a number of its parts using a process called Fused Deposition
Modeling (FDM) This process involves extruding a thread of plastic and laying it down
in thin layers to build a part. This enables us to supply you products that enhance your
underwater photography and videography.
Care and Maintenance
The FDM part is impact resistant and will withstand most drops from table height.
However, as with all plastic parts, they cannot withstand excessive pressure and force
without breaking. Being careful means handling the product during assembly with a light
touch, do not force.
If your part gets wet let it drip-dry for about an hour. If you have to pack it before it is dry
then wrap it in something absorbent such as a paper towel, tee shirt or sock and put it into
a plastic bag. This will keep your other parts from getting dripped on.
FDM Plastic Part Warranty
FDM parts are guaranteed to be free of manufacturing defects for a period of one year
from date of purchase. Unnecessary force can cause excessive wear and possibly break
the parts voiding warranty. Damaged or broken parts will be inspected. If Xit 404 determines
that the parts were misused or abused, warranty will be void. Valid purchase receipt is
required for all warranty claims.
Canon 8-15/16-35 Zoom Gear Product Line
ZOOM
GEAR
1.4X
ZOOM
GEAR 2X
ZOOM
GEAR
ZOOM
GEARS
PRODUCT
CODES
PRODUCT
CODES
PRODUCT
CODES
Aquatica Canon 8-15mm/16-35mm Gear
GC1201AQ
GC5201AQ
GC5241AQ
Aquatica Type 4 Canon 8-15mm/16-35mm Gear
GC1202AQ
GC5202AQ
GC5242AQ
Nauticam Canon 8-15mm/16-35mm Gear
GC1203NC
GC5203NC
GC5243NC
Sea & Sea Canon 8-15mm/16-35mm Gear
GC1204SS
GC5204SS
GC5244SS
Subal Type 4 Canon 8-15mm/16-35mm Gear
GC1205SU
GC5205SU
GC5245SU
Revsion 2.0 - APR2013
www.xit404.com
CANON EF 8-15mm f/4L Fisheye USM and EF 16-35 f/2.8L II USM ZOOM GEAR
WARRANTY INFORMATION
