manualshive.com logo in svg

Xirrus Wi-Fi Array XS-3500, Руководство пользователя

Поделиться
Скачать
Xirrus Wi-Fi Array XS-3500 Скачать руководство пользователя страница 168

Wi-Fi Array

146

Viewing Status on the Wi-Fi Array

The Spectrum Analyzer offers several display options:

z

To display horizontal bar graphs, click the 

Rotate

 checkbox at the bottom 

of the data window. 

z

In the rotated view, if you wish to view data as a numerical table, click the 

Text

 checkbox. Click again to return to a graphical display. The text 

option is only available in the rotated view. 

z

When viewing a graphical display, click 

Bars

 to have the bar graphs 

displayed against a gray background—you may find this easier on the 
eyes. This operation is not available when Text is selected.

z

You may sort the rows based on any column that has an active column 

header, indicated when the mouse pointer changes to the hand icon 

. 

Sorting is only available in the rotated view. 

z

At the bottom left of the frame, you may select whether to display only 
2.4 GHz channels, 5 GHz channels, or both (both is the default). Note that 
the data is an instantaneous snapshot—it is not an average or a 
cumulative total. 

Spectrum Analyzer Measurements

The spectrum analyzer displays the following information:

z

Packets/Sec:

 Total number of Wi-Fi packets per second on the channel, 

both valid and errored packets. 

z

Bytes/Sec:

 Total number of Wi-Fi bytes per second on the channel, valid 

packets only.

z

802.11 Busy:

 Percentage of time that 802.11 activity is seen on the channel. 

z

Other Busy:

 Percentage of time that the channel is unavailable due to 

non-802.11 activity. 

The total busy time (802.11 Busy plus Other Busy) will never total more 
than 100%. The remaining time (100% minus total busy time) is quiet 
time—the time that no activity was seen on the channel.

Содержание Wi-Fi Array XS-3500




























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды