manualshive.com logo in svg

Xirrus Wi-Fi Array XN16, Руководство пользователя

Поделиться
Скачать
Xirrus Wi-Fi Array XN16 Скачать руководство пользователя страница 4

Trademarks

is a registered trademark of Xirrus, Inc. All other trademarks and brand 

names are marks of their respective holders.

Notices

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, you are 
encouraged to try to correct the interference by one or more of the following 
measures:

z

Reorient or relocate the receiving antenna.

z

Increase the separation between the equipment and the receiver.

z

Consult the dealer or an experienced wireless technician for help.

Use of a shielded twisted pair (STP) cable must be used for all Ethernet 
connections in order to comply with EMC requirements.

RF Radiation Hazard Warning

To ensure compliance with FCC RF exposure requirements, this device must be 
installed in a location where the antennas of the device will have a minimum 
distance of at least 25 cm (9.84 inches) from all persons. Using higher gain 
antennas and types of antennas not certified for use with this product is not 
allowed. The device shall not be co-located with another transmitter.

Содержание Wi-Fi Array XN16








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды