9
Sales Engineering
PC Device Configuration:
a. A RS-232 to USB TTL converter cable is required to connect an XT6350 device to a computer for
local configuration. Serial Port # 2 is used for configuration. Connect the XT6350 Tx wire to the
TTL converter cable Rx wire. Connect the XT6350 Rx wire to the TTL converter cable Tx wire.
Connect the XT6350 ground wire to the ground wire of the TTL converter cable. Use a terminal
application to connect to the COM port associated with the TTL converter cable. Use the
following settings:
A. Terminal Application Settings:
a. Bits per second: 115200
b. Data bits: 8
c. Parity: None
d. Stop bits: 1
e. Flow control: None
B. Load Script File with the following command
a. :grscr x 2
C. Load Parameter File with the following command
a. :uyscr x 2
D. Save the configuration
a. :vycfg
Feature Matrix:
Technology
1XRTT
Feature Highlight
XT-4550
Locate
X
Idle
X
Vehicle Disable
X
5 Digital IO
X
2 - 1 Wire Bus
X
Ignition On/Off
X
Mileage
X
Periodic Reporting
X
Speed
X
Direction Change
X
Battery Voltage
X
Battery Disconnect
X
Tow Alerts
X
Movement Start/Stop
X
Acceleration/Deceleration
X
Содержание XT6350
Страница 4: ...3 Sales Engineering support xirgotech com ...