XT1520-1 Product Manual
Page 8 | 10
CONFIDENTIAL AND PROPRIETARY
6. R
EGULATORY
S
TATEMENTS
6.1. FCC
This equipment with FCC-ID: GKM-XT1520-1 and IC-ID: 10281A-XT15201, Model: XT1520-1 is subject to the
Federal Communications Commission (FCC) and Industry Canada (IC) rules.
NOTICE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications made to this equipment not expressly approved by Xirgo Technologies, LLC may void
the FCC authorization to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
l
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
l
Consult the dealer or an experienced radio/TV technician for help.
Radio frequency radiation exposure Information:
This equipment, XT1520-1, complies with FCC and ISED radiation exposure limits set forth for an uncontrolled
environment. This equipment must be installed and operated with minimum distance of 20cm between the
XT1520-1 and your body.
