Xirgo Global
Chemijos st. 15 LT-51332, Kaunas, Lithuania
www.xirgoglobal.com
Installation of central unit
Steps to install central unit:
1.
Open the housing by gently lifting the plastic holders on each side and remove the PCB from
it.
o
Use thin screwdriver to lift up the plastic holders in order not to brake them.
2.
Locate the SIM holder and following the printed picture on the PCB insert the SIM card.
3.
Place the PCB to the housing and close it.
4.
Use plastic fastening straps to fix device in a stable position (units housing has four holes, for
straps to go through and fasten them to the body of the vehicle).
5.
Connect power supply;
6.
Connect ignition wire to a digital input (usually IN5);
7.
Connect array;
8.
Connect other devices (optional).
Tools/equipment necessary for the installation:
1.
Pliers
2.
Stripping pliers
3.
Screwdriver
4.
Multimeter (tester)
5.
Fastening straps
6.
Isolation tape
