Jul-21, V1.1
Page
17
/
20
DEVICES
DEVICES
●
Open the lid and take the heating/stirring rod out via
the opening. Place the heating/stirring rod on paper
towels.
●
The rod sleeve can be removed after a slight rotation.
●
The rod, its sleeve, and the container can be cleaned
with a brush, cloth or sponge and water with an ordinary
detergent. After cleaning, rinse the rod, sleeve, and
container with clean water.
●
Support material residue can be disposed of with
common packaging or plastic waste.
Caution: Make sure that the black top of the
heating/stirring rod does not get wet.
●
Slide the sleeve over the rod again and fasten it with a
slight clockwise rotation until snapped in.
●
Close the container with the perforated lid and
introduce the heating/stirring rod via the big opening
into the container.
No regular maintenance is required for the heating/stirring rod.
Regularly check that the stirrer and heater function correctly.
Disposal
For the protection of the environment, resources, and health,
we ask you to be responsible and recycle the VXL GO Starter kit
at the end of its lifetime. The container, lid and siphon pump
can be disposed of in common packing or plastic waste.
The heating/stirring rod must not be disposed of with common
household waste or residual waste, but must be taken to a
collection point for electrical and electronic waste.
