12
Part Number
18150, E, 02/07/2018
Installation
Installing the Mounting Base
Mounting Base should be installed vertically when installing CO Alarm on a wall.
Use appropriate length #6, Pan Head screws to secure Mounting Base.
Do not over-tighten.
Drill appropriate size hole (0.38” (9.5mm) Max) for wired models to accommodate the
wires.
If using a connector on the wires, a larger hole may be needed. Offset the hole
to the side of the Mounting Base with the wire slot, as shown.
Connecting Alarm to Mounting Base
Align Mounting holes of CO Alarm with the posts on the Mounting Base.
Feed wires through the Mounting Base and mounting surface.
Mounting Hole
2 PLCS.
Drill Location for wiring.
0.38” (9.5mm) Max
0.38”
(9.5mm) Max
Wire Slot
Mounting Hole
Post
