Xinpu XP-R48VA, Инструкция по эксплуатации, Страница: 12 / 15

12
3. Maintenance of the motor
The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the
winding does not become damaged and/or wet with oil or water.
4. Inspecting the carbon brushes
The Motor employs carbon brushes which are consumable parts. When they become worn to or near
the “wear limit”, it could result in motor trouble. When an auto-stop carbon brush is equipped, the
motor will stop automatically. At that time, replace both carbon brushes with new ones which have
the same carbon brush of specification with standard. In addition, always keep carbon brushes clean
and ensure that they slide freely within the brush holders.
5. Replacing carbon brushes
When the carbon brushes are worn out, the power tool switches itself off, and also the red indicator
light of carbon brush will turn on. The power tool must then be sent to an after-sales service agent.
(Fig. 2)
When you have to replacement the carbon brushes by yourself, please following the order
：
(1) Loosen the four set screws and remove the fan cover.
(2) Remove the brush caps and carbon brushes.
(3) After replacing the carbon brushes, tighten the brush caps securely and install the fan cover with
securely tightening four set screws.
7.Warranty
：
For the condition of warranty, please refer to the separately provided warranty card.
8. Environment
Faulty and /or discarded electrical or electronic apparatus have to be collected at the
appropriate recycling location.
CAUTION:
Repair, modification and inspection of XINPU Power tools must be must be carried out by a XINPU
Authorized Service Center.
In the operation and maintenance of power tools, the safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS:
XINPU Power Tools are constantly being improved and modified to incorporate the latest
technological advancements.
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice.
NOTE:
Due XINPU’s continuing program of research and development, the specifications herein are subject to
change without prior notice.