6
Special requirements for rotary hammer
-
Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
-
Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
-
Hold Power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a
“live” wire may make exposed metal parts of the power tool “live” and could give the operator an
electric shock.
-
Wear a dust mask.
Do not inhale the harmful dusts generated in drilling or chiseling operation.
The dust can endanger the health of yourself and bystanders.
-
Always hold the body handle and side handle of the power tool firmly.
Otherwise the
counterforce produced may result in inaccurate and even dangerous operation.
-
Before beginning work, check the working area (e.g. with a metal detector) to ensure that no
concealed electric cables or gas and water pipes are present.
Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line
causes property damage or may cause an electric shock.
-
In case of damages the replacement of the plug or the supply cord shall always be carried out by the
manufacturer of the tool or his service organization
-
Do not touch the bit during or immediately after operation. The bit becomes very hot during
operation and could cause serious burns.
-
Do not use the power tool with a damaged cord. Do not touch the damaged cord and pill the
plug from the outlet when the cord is damaged while working.
Damaged cords increase the risk
of an electric shock.
Warning:
Reduce the working time to avoid risks related with too much vibration.
In this operator's manual/or machine’s labels following symbols are used:
Accordance with essential applicable safety of European directives
Double insulation
Denote risk of personal injury, loss of life
or damage to the tool
in case of nonobservance of
the instruction in this manual.
Indicate electrical shock hazard.
Immediately unplug the plug from the main electricity in the case that the cord gets damage and
during maintenance.
Wear ear and eye protection.
2. Safety instructions
