Xinje TH465-M Скачать руководство пользователя страница 4

Страница: 4 / 70

Safety caution

Please read the manual carefully before using. Make sure your operation is correct and safety. The

following contents are only aimed at TH series products.

Please keep the manual properly, put in the location easy to get and read, hand the manual to the

end users.

Please do not bundle power line with communication cable or let them too close,

keep at least 10cm.

Please do not install module or change the wire. Otherwise it may cause

malfunction, error action, damage or fire.

Please shut off the power when there is abnormal smell or voice in TH products.

(The short sound made by buzzer after power on is normal)

Do not strike the touch panel with a hard or sharp object, or press on the touch

panel with too much force or with pen, screw, since it may damage the touch panel

and cause damage.

Please tighten the screws when install the products to prevent from falling off.

Please transport, store, set up, install and maintain the products correctly, otherwise

the touch panel may be damaged.

Confirm the rated voltage of TH and connect correct before power on.

Please do not touch the terminals after power on to avoid electric shock.

Please do not open the cover board.

Please cut off all the power when installing or disassembling the products, or it

may cause error action and malfunction.

Please use TH touch screen in suitable environment conditions according to

instructions, otherwise it may cause accident.

Please do not use the products where there is high frequency radiate, high magnetic

field or other interferences.

DANGERS

NOTICE

Содержание TH465-M







































































Результаты поиска

Содержание TH465-M

Отзывы:

Похожие инструкции для TH465-M

Бренды по названию

Популярные бренды

Xinje TH465-M, Руководство пользователя

Результаты поиска

Содержание TH465-M

Отзывы:

Похожие инструкции для TH465-M

Бренды по названию

Популярные бренды