Xinje DP-5022, Руководство пользователя, Страница: 14 / 23

DP-708/DP-5022 series stepper driver
10
Table 1 driver parameters
Table 2 Serial port parameters
Function Default Setting Setting Range
P0-04.0 Baud Rate 6 0~9
0: 300
1: 600
2: 1200
3: 2400
4: 4800
5: 9600
6: 19200
7: 38400
8: 57600
9: 115200
P0-04.1 Data Bit 0 0: 8
P0-04.2 Stop Bit 2
0: 2 Bit
2: 1Bit
P0-04.3 Parity Bit 2 0~2
0: None
1: Odd
2: Even
The steps to change the parameters:
The parameter setting is used to change the parameters. Check the permitted range of
the parameters in the above table before changing the data.
This example shows how to change parameter P0-02 from 8 to 16.
1. Press the STATUS/ESC key to enter parameters setting mode and then press the
ENTER key to enter.
2. At this time ,the left second LED is blinking ,and press ENTER key to confirm, the
right two LEDs are blinking, press INC key, DEC key or ENTER key to select NO. 2
P0- Name Unit Default
setting
Setting range Reference
00 Phase-current (virtual value
）
0.1A 10 0~70
01 Half-current enable 0 0~1 0: Half-current
1: Full-current
02 Pulse number per circle 1600 200~65535
03 Modbus station NO. 1 1~255
04 Parameters of serial port 2206 0~2209 Refer to table 2
05 Internal / External Pulse
Selection
0 0~1 0: External Pulses
1: Internal pulses