Xinje 4GBOX, Руководство пользователя

Страница: 24 / 28

5-2-1. Serial port setting
XC series PLC serial port parameters can be set to Modbus or free format protocol. Make sure to
match below parameters when connecting to 4GBOX, it is recommended to use default
parameters.
Communication protocol
Modbus RTU
Serial port speed
19200bps
Data bit
8
Stop bit
1
Parity
even
4GBOX default serial port parameters are same as above table, please ensure the serial port
parameters of the two devices are consistent when using. If it needs to change the parameters,
please use XINJE Config tool. Please click find device/modbus find/4GBOX. After connecting
successfully, click single device/comport to set the parameters then click writeconfig.