4. Depending on the Bluetooth® enabled device which you are trying to connect it to
the speaker, it may be necessary to type a pass code. Please type “0000” if you are
prompted by the device. Your Bluetooth® enabled device will confirm that the pairing
was completed, and remind you to accept the connection. Please respond YES to
connect the product to your Bluetooth® enabled device.
Note :
When you turn on and switch the Bluetooth Speaker to Bluetooth Mode, it will
automatically connect to the paired Bluetooth® enable device if they are in the
required range.
Using Bluetooth Speaker
1. Playing Music of Bluetooth® enabled device
Connect your Bluetooth® Speaker to Bluetooth® enabled device following above
steps. After connected successfully, you can press “PLAY “on your Bluetooth®
device or “Play/Pause” button on the top side of product to play/pause the song. Long
press ”NEXT/VOL+“ or “PREV/VOL-“ to increase or decrease the volume. Short
press” ”NEXT/VOL+“ or “PREV/VOL-“ to select next or previous song.
Note :
You may also adjust the volume from your Bluetooth® enabled device's
volume control.
2. Listen to TF card
Insert USB card / TF card into the USB / TF port of speaker, the unit will play the
song of USB card/TF card automatically. Short press “Play/Pause” button on the top
side of product to play/pause the song. Long press ”NEXT/VOL+“ or
“PREV/VOL-“ to increase or decrease the volume. Short press” ”NEXT/VOL+“ or
“PREV/VOL-“ to select next or previous song.
3. Listen to AUX function
Connect one end of AUX cable to the Bluetooth speaker and the other end to the
audio device. The speaker will play the song automatically. Short press “Play/Pause”
button on the top side of product
to play/pause the song. Long
press ”NEXT/VOL+“ or “PREV/VOL-“ to increase or decrease the volume. Short
press” ”NEXT/VOL+“ or “PREV/VOL-“ to select next or previous song.
RGB LED light
Press the Light button, turn on/off RGB LED LIGHT.
