Safe Operation of These Lights:
1) When the lamp is in operation, be sure not to move or shake it in order to avoid liquid becoming murky and
permanently damaged.
2) Use only 30 Watt R39 E14 light bulb for the replacement of the bulb. Variance in bulb size or wattage will produce
unsatisfactory operation, fire or breakage of the glass tube.
3) The lamp bulb and reflector may be off centre during shipping. Please re-centre them before plugging the lamp
in.
4) DO NOT INGEST.
5) This is not a toy. This is an electrical lamp. Keep out of the reach of small children. The Motion Lamp is designed
to operate in an average room temperature of 20 – 25
o
C (68-77 F). It takes approx. 3-5 hours to warm up. Do not
leave the lamp unattended during use.
6) Keep the Motion Lamp from sources of cold or warm wind such as heating and air conditioning vents.
7) The colour of the wax will mellow after 2-3 runs of operation. If the tube without floating. Wait until room
temperature is achieved before restarting.
8) The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
Assembly:
Un-pack all contents carefully. Ensure the item is unplugged. Place the speaker base on to a flat surface. Position the
the Lava bottle upwards and place in to the speaker base securing it firmly. Place the Lid on top of the Lave bottle.
Connection to the power supply:
Plug the end of the mains lead into a wall socket and switch on the wall socket, and turn ON of the Power Switch.
Pairing the speaker with Bluetooth devices (Phone or Music Device)
Turn ON the unit, press the Bluetooth ON/OFF button for a short while, the Blue LED will flash and you will
hear “Bluetooth mode”
Turn on the Bluetooth function on your Bluetooth Device (Mobile Phone or Tablet). Please refer to manufacturer’s
instructions on enabling Bluetooth on your device.
Once you have turned on Bluetooth on your device, select the device
“
LAVA01
”
from the list of available Bluetooth
devices.
If required, enter the password ‘
0000
’ to confirm to pairing.
Once paired successfully, you will hear a tone indicating pairing successful.
The speaker will remember this device and will pair automatically when the device’s Bluetooth is activated and in
range. You do not need to pair any previously connected devices again. Please refer to your device’s user manual for
further information.
Control Functions:
