4
LED Indicators
LED
Color
Indication
Network
Green
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Amber
Steady for connection to 10 Mbit/s network. Flashes for
network activity.
Unlit
No network connection.
Status
Red
Steady red for failed upgrade or booting.
Power
Green
Steady green for normal operation or booting.
Flashes green during firmware upgrade.
Note: Steady green and red during booting. Flash green and red during factory default.
2. Installation
For the operation of the Network Camera, it is necessary to connect a network cable for
data transmission, power connection from supplied power adapter and connect a general
analog camera. Depending on operation methods, it is possible to connect an alarm cable
or audio cable additionally. For its fixation on different locations, please consult with an
installer.
Network Connection
The Network Camera supports the operation through the network. Therefore, it is
necessary to connect a standard RJ-45 cable to it. Generally a cross-over cable is used for
directly connection to PC, while a direct cable is used for connection to a hub.
IP Assignment
When a camera, Encoder or Decoder is first connected to the network it has no IP address.
So, it is necessary to allocate an IP address to the device with the “Smart Manager” utility
on the CD.
1.
Connect the Network Camera / device to the network and power up.
2.
Start SmartManager utility ( All Programs> NautilusClient16 > SmartManager), the
main window will be displayed, after a short while any network devices connected to
the network will be displayed in the list.