HNG-D312S, Quick Installation Guide
3
• Extension Cable
NO
Wire Color
Description
1
Red: DC12V
White: GND
Main Power, 2pin terminal, DC12V, max. 4.0W
2
Black
Ethernet,
RJ-45 port compatible with 10/100Mbps PoE.
Modular Jack
2. Installation
2.1 Connection
• Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for connection
to a hub.
• Connecting Alarms
AI(Alarm In) :
You can use external devices to signal the network camera to react on events. Mechanical or
electrical switches can be wired to the AI (Alarm In) and G (Ground) connectors in the bottom
.
G(Ground) :
Connect the ground side of the alarm input and/or alarm output to the G (Ground) connector.
Alarm Out :
The network camera can activate external devices such as buzzers or lights. Connect the device
to the AO (Alarm Out) and G (Ground) connectors.
• Connecting Video Output
Video Output is used for an easy zoom and focus control
when installing lens.
Connect your Video cable unit to J5 on the board.
• Connecting the Power
Connect the power of DC12V 0.35A for the network camera. Connect the po) pole to the
‘+’ position and the negative(-) pole to the ‘-‘ position.
Use certified / Listed Class 2 power source only.
